Categories R&S

L3 Technologies – EIGRP – Authentication

In this post, I will have a look at the different authentication methods that can be used with EIGRP.   Cisco link for the configuration guide: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_eigrp/configuration/15-mt/ire-15-mt-book/ire-sha-256.html   L3 Technologies – EIGRP – Authentication – Physical network diagram   L3 Technologies – EIGRP – Authentication – MD5:   MD5 is the less secured method to authenticate EIGRP. […]

Read More
Categories R&S

BGP – implement and troubleshoot Peerings – Authentication

One quick post about BGP authentication.   Requirements: Use BGP authentication to secure the BGP session between R6 and R10.   Diagram:   Configuration and verification: That’s an easy configuration. Only one command under the BGP process. R6(config)#router bgp 100 R6(config-router)#neighbor 10.10.1.10 password CISCO R10(config-router)#neighbor 10.100.1.6 password CISCO R10# clear ip bgp *   We […]

Read More
Categories R&S

OSPF – Implement and troubleshoot authentication – MD5 authentication

Let’s continue our CCIE R&Sv5 study with more OSPF authentication.   Requirements:   Configure OSPF authentication in area 2 using MD5 and key CISCO.   Diagram:   Configuration and verification: Let’s start by R4. Because R4 has all his interfaces in area 2, we will enable the authentication at the OSPF process level. Still we […]

Read More